Williams Sound IC-2 Interpreter Control Console

Available: In Stock
$2,189.00 $2,430.00

Williams Sound IC-2
Interpreter Control Console

The Williams Sound IC-2 is the audio control center for interpreters. One or two interpreters monitor the floor or relay language, switch on their microphone and send the interpretation to one of two language groups, all from a single stand-alone unit.

View Brochure Similar Product
How it works

Listen, speak and route the interpretation

Backlit buttons and a clear layout keep each interpreter in control of what they hear and where their voice goes.

1

Choose floor or relay

Each interpreter selects the source to listen to with the backlit blue buttons. The two listening modes are either/or: turning one on turns the other off.

2

Switch the microphone on

The backlit red Mic On button activates the microphone. The two Mic On buttons are interlocked, so a mic can only be turned on if the other is off. A shared mute button mutes both mics while pressed.

3

Send it to the right group

The yellow CH2 Output button selects the language group: light on sends the interpretation to CH2 Out, light off to CH1 Out. A yellow LED shows when CH2 is in use.

What's Included:

  • (1)Williams Sound IC-2 Interpreter Control Console.
  • (1)WCA 091 25 ft CAT 5 cable.
  • (1)TFP 044 power supply.

All items can be purchased separately.

Where it fits

Made for presentation-style conferences

The Williams Sound IC-2 is built for international conferences, summits and events where a floor language and a single relay language are used, for up to 14 languages. It is designed to meet international standards for portable interpretation consoles.

Floor and relay

Interpreters monitor the floor language or the relay language and feed the interpretation to the group that needs it.

Works with your transmitters

Compatible with Williams Sound FM, infrared and Digi-Wave transmitters and with Enersound FM transmitters.

Portable or fixed

Use it as a stand-alone unit on a table or build it into a fixed installation.

Ideal for
  • International conferences
  • Summits and multilingual events
  • Presentation-style sessions with a floor and a relay language
Highlights
  • CAT5 audio bus for simple cabling and easy cascading to more interpreters.
  • Built-in distribution amplifier and mini mixer reduce external equipment.
  • Floor language feedthrough.
  • Interlocking microphone and CH2 (relay) output functions.
  • Soft-touch buttons for smooth, quiet operation.
  • Individual volume and tone controls for each interpreter.
  • Five-year warranty.
Interpreter comfort

Multiple microphone and headset options

Each interpreter can use the microphone and headset they prefer, with their own volume, bass and treble controls.

Microphone inputs

  • 3-pin XLR input with switchable 12 VDC phantom power.
  • 3.5 mm input for electret condenser microphones.

Headphone outputs

  • 3.5 mm headphone jack, mono or stereo.
  • 3.5 mm combination headset jack for iPhone-style headsets.

Listening controls

  • Left and right volume knobs.
  • Bass and treble with a center detent (±12 dB).
Connections

Add interpreters with a CAT5 cable

The IC-2 bus in and out jacks pass the floor and relay audio on to another IC-2 over CAT5, so you can add interpreters without extra distribution amplifiers.

IC-2 interpreter console rear panel with CH1 and CH2 XLR and RCA outputs, IC-2 bus in and out jacks and floor in

Floor in

XLR floor input with its own level control and an optional floor feedthrough to each output.

CH1 and CH2 outputs

Balanced XLR outputs for each language group, plus RCA jacks for recording CH1 and CH2 audio.

Level and ground

A peak level LED shows the optimal output level, and a ground lift switch separates chassis and audio grounds.

Specifications

Technical specifications

General
Dimensions 10 in (25.4 cm) × 6.35 in (16.1 cm) × 2.45 in (6.2 cm)
Weight 3.4 lbs (1.5 kg)
Color Black and silver
Power External power supply, 18 VDC desktop-style switching inverter, 110-240 VAC, 50-60 Hz, 1 A
Approvals and declarations CE, FCC, Industry Canada, RoHS, C-Tick, CB
Warranty 5 years parts and labor (90 days on accessories)
Inputs and outputs
Floor in 3-pin XLR female jack, balanced (or unbalanced) input, 24 kΩ differential input impedance, max balanced input +19 dBu
IC-2 bus in / out CAT5 8p8c RJ45 female receptacle, distributes balanced line level floor and relay audio to another IC-2
XLR microphone inputs 3-pin XLR female jack, balanced (or unbalanced) input. Switchable 12 VDC simplex power. Variable gain of 58 dB, 2.4 kΩ balanced input impedance, max balanced input +19 dBu
3.5 mm microphone inputs Stereo 3.5 mm TRS jack (pink) and stereo 3.5 mm TRRS jack (black), unbalanced, for electret condenser mics. Variable gain of 40 dB. Bias 3.7 VDC through 2.7 kΩ
3.5 mm TRRS headphone output Tip = left, ring 1 = right, ring 2 = GND, sleeve = mic. 40 mW max power into a 32 Ω stereo headset
3.5 mm headphone output Mono or stereo headphone, 8 Ω minimum. 190 mW max power into a 32 Ω stereo headset
CH1 out, CH2 out 3-pin XLR male jack, balanced output. Max output +19 dBu into a 600 Ω balanced load
RCA jacks Red: recording and CH1 audio, interpreter audio only, no feedthrough. White: recording CH2 audio
Controls and indicators
Volume Left and right rotary, controls headphone volume
Bass and treble tone Left and right rotary with center detent, controls headphone bass and treble levels
Mute Push button, backlit red, mutes left and right mics while pressed
Mic On Push button, backlit red, activates the microphone. Left and right Mic On buttons are interlocked: a mic can only be turned on if the other is off
Floor input, relay input Push buttons, backlit blue, select the listening language group. Listening modes are either/or
CH2 output Push button, backlit yellow, selects the microphone output language group: light on = CH2 out, light off = CH1 out
Gain adjust Rotary gain pots control the level of microphone and floor audio
Phantom power Slide switch enables 12 VDC simplex power to the XLR microphone
CH1 / CH2 feedthrough Slide switches enable floor feedthrough to the CH1 and CH2 XLR outputs
Ground lift Slide switch disconnects chassis and audio grounds inside the console
Indicators Green peak level LED on the back panel (optimal level when blinking); yellow CH2 output in use LED on the front panel
Audio performance
Frequency response 45 Hz to 20 kHz, +0/-3 dB re: 1 kHz with flat bass/treble
Distortion at 1 kHz <0.5% THD at full power
Signal to noise ratio >82 dB at 1 kHz
Crosstalk attenuation >63 dB at 1 kHz
Tone controls Bass: +12 dB boost or -12 dB cut at 100 Hz. Treble: +12 dB boost or -12 dB cut at 10 kHz

Planning a multilingual event?

Tell us how many languages and interpreters you need and which transmitter you use, and we will help you put together the right interpretation system.

Call (888) 737-4030 Chat with a specialist

FAQs About the Williams Sound IC-2 Interpreter Control Console

What is the Williams Sound IC-2 interpreter control console?

The Williams Sound IC-2 is the audio control center for simultaneous interpretation. As a stand-alone unit, it lets one or two interpreters monitor the floor or relay source, activate their microphone inputs and route the interpretation to one of two language groups.

How many interpreters and languages can one IC-2 handle?

One IC-2 serves one or two interpreters. It is designed for presentation-style conferences of up to 14 languages, where a floor language and a single relay language are used.

Can I connect more than one IC-2?

Yes. A CAT5 audio bus carries the floor and relay audio from one IC-2 to the next through the IC-2 bus in and out jacks, which makes it easy to cascade additional interpreters without extra distribution amplifiers.

Which transmitters can I use with the IC-2?

The IC-2 works with Williams Sound FM, infrared and Digi-Wave transmitters, and with Enersound FM transmitters, for portable or fixed installations.

What microphones and headsets can the interpreters use?

Each interpreter has an XLR microphone input with switchable 12 V phantom power, a 3.5 mm microphone input for electret condenser microphones, a 3.5 mm headphone output and a 3.5 mm combination headset jack for iPhone-style headsets.

What is included with the IC-2?

The IC-2 interpreter control console, a WCA 091 25 ft CAT 5 cable and a TFP 044 power supply. All items can also be purchased separately.

Can I record the interpretation?

Yes. The red RCA jack carries the CH1 interpreter audio for recording, with no floor feedthrough, and the white RCA jack carries the CH2 audio.

How is the IC-2 powered, and what is the warranty?

It runs on an external 18 VDC power supply (110-240 VAC, 50-60 Hz). The IC-2 has a five-year warranty on parts and labor, and 90 days on accessories.

Lower-price option

Enersound IC-50 Bilingual Interpreter Console

Enersound IC-50 bilingual interpreter console with two interpreter positions
Our lower price$990.00

For a bilingual session with English and one foreign language, the IC-50 gives two interpreters their own volume control and microphone on/off, with A (English) and B (Foreign) output buttons, a shared mute and mic gain.

Buy the IC-50

Compare Products

Loading comparison…

Customer Reviews

Based on 4 reviews
100%
(4)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
M
Mr. Irwin
Fantastic

It's a dependable tool for school settings, ensuring effective interpretation and inclusive events.

S
Sarah A
Fantastic

The intuitive layout and clear display allow me to manage channels seamlessly. The built-in microphone is a convenient feature, and the headphone output ensures I can hear the audio clearly. The compact design makes it easy to transport, and I appreciate the durable construction. A fantastic tool for interpreters in conference settings.

C
Craig
So far so good

It efficiently manages interpretation channels during multilingual events. Works really well so far.

N
Noel
Great for interpreters!

A great tool for simultaneous interpretation. 100% recommendable